{"product":{"productId":"agid.24346","price":86.25,"name":"Status sensors, stainless steel with bracket for toggle clamps"},"currency":"EUR"}
Material
Stainless steel
Version
Bright.
Show more
Show less
Status sensors, stainless steel with bracket, Form H, for horizontal toggle clamps
from
€86.25
plus sales tax
plus shipping costs
Status sensors, stainless steel with bracket, Form V, for vertical toggle clamps
from
€86.25
plus sales tax
plus shipping costs
Description
Product description
Status sensors with brackets are used to monitor the actuated status of toggle clamps.
The sensor detects whether the toggle clamp is open or closed and enables this status information to be processed electronically.
The sensor is attached to the toggle clamp via the bracket.
The sensor detects whether the toggle clamp is open or closed and enables this status information to be processed electronically.
The sensor is attached to the toggle clamp via the bracket.
Material
Stainless steel
Version
Bright.
Note
The status sensor and brackets are supplied unassembled.
Technical Data
Inductive sensor:
Output relay: PNP normally open (NO)
Operating voltage: 10 - 30 V DC
Operating current: 100 mA
Switch gap: 0.8 mm
Switching frequency: 5000 Hz
Short-circuit proof: yes
Reverse polarity protected: yes
IP rating: IP 67
Connection type: 0.3 m cable, PUR, with plug
Temperature range: -25° C - +70°C
Approvals: CE, c-UL-us, UKCA, WEEE
Output relay: PNP normally open (NO)
Operating voltage: 10 - 30 V DC
Operating current: 100 mA
Switch gap: 0.8 mm
Switching frequency: 5000 Hz
Short-circuit proof: yes
Reverse polarity protected: yes
IP rating: IP 67
Connection type: 0.3 m cable, PUR, with plug
Temperature range: -25° C - +70°C
Approvals: CE, c-UL-us, UKCA, WEEE
Temperature range
Temperature range: -25 °C to +70 °C
Assembly
The status sensor is fastened to the bracket with the nuts and set to dimension L1.
The bracket is attached with the toggle clamp screws through holes between the foot and the mounting surface.
The switch point fine-tuning is carried out once the toggle clamp is mounted.
The detailed procedure is described in the assembly instructions.
The bracket is attached with the toggle clamp screws through holes between the foot and the mounting surface.
The switch point fine-tuning is carried out once the toggle clamp is mounted.
The detailed procedure is described in the assembly instructions.
Safety
Status sensors are not suitable for protecting people.
Drawing reference
1) LED-indicator
BN = brown
BK = black
BU = blue
BN = brown
BK = black
BU = blue
Accessory
Horizontal toggle clamp with horizontal foot 05900.
Vertical toggle clamp with horizontal foot 05908.
Connector M8x1 bush with screw lock, unshielded 80150.
Cable tie block 10451.
Vertical toggle clamp with horizontal foot 05908.
Connector M8x1 bush with screw lock, unshielded 80150.
Cable tie block 10451.
Accessory
05900
05908
10451
80140
05908
10451
80140
Other customers also bought
